NEWS

Because the shower adopts electroplating process, which is different from other bathroom products, there are also different maintenance methods. Due to water quality and environmental factors, certain scale and impurities will be generated inside the shower. Scale and impurities will accumulate to a certain extent, which may affect your bathing comfort and even damage the shower. The maintenance of shower parts is easy to be ignored, especially the maintenance of shower top spray. Therefore, we should pay attention to the proper maintenance of the products. Here's a detailed introduction to the maintenance of shower top spray, so that you can enjoy yourself.
Precautions and maintenance of shower shower top spray:
1. In order to ensure the durability of the product, please operate as gently and slowly as possible.
2. After using for a long time, if it is found that the shower water does not flow out regularly and intermittently, there are sundries blocking the water outlet. At this time, just gently move the soft glue at the shower outlet by hand, and the small sundries will automatically replenish water and flush out.
3. Do not use strong acid to remove scale, so as not to cause corrosion to the surface of the shower.
4. The heating water side of the faucet is in a high temperature state. Please be careful not to let the skin directly contact the surface to avoid scalding.
5. Do not use detergent. Polishing powder and other detergent containing particles or nylon.
6. As acid detergent can erode the electroplated layer, it shall not be used when cleaning and washing; If you wash tiles with acid, wash the shower immediately and wipe it clean with a soft cloth.
7. When the faucet is very dirty, wipe it with an appropriate amount of diluted neutral washing soft cloth, and then rinse it with clean water to prevent stains on the faucet.
8. When cosmetics and laundry detergent stick, the electroplated surface will lose luster. Please dry the faucet with a soft cloth after full washing to ensure that the faucet takes on a new look.
9. When you don't use the tap for a long time, please close the main water inlet valve in your house.
10. When the ambient temperature is below 0 ° C, please take necessary thermal insulation measures for your water equipment in time.
11. The service environment of the shower shall not exceed 70 ℃. High temperature and ultraviolet light will greatly accelerate the aging of the shower and shorten the service life of the shower. Therefore, the installation of the shower shall be far away from Yuba and other electrical heat sources as far as possible. The shower shall not be installed directly below the Yuba, and the distance shall be more than 60cm.
12. The metal hose of the shower head shall be kept in a natural stretch state, and it shall not be coiled on the faucet when not in use. At the same time, pay attention not to form a dead angle at the joint between the hose and the faucet, so as not to break or damage the hose.
13. The water supply and drainage hoses shall be inspected regularly. Once cracks are found, they shall be replaced immediately, so as to ensure that the service life of the faucet will not be affected.